keepface

Pat Quinn

Pat Quinn

United States, Wayne

Influencer Overview

Categories

Ranking

Global

186412

Country

40977

Network

Instagram (34.7k)

Statistics

34.7k Total Audience

1.83% Engagement Rate

Pat Quinn

Pat Quinn is one of the top influencer in United States with 34736 audience and 1.83% engagement rate on Instagram. Check out the full profile and start to collaborate.

Audience

34.7k

Engagement Rate

1.83%

Channel Accounts

Feed

❤️☀️
Tong making @centerformetalarts

❤️☀️ Tong making @centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger tires. I’m super pumped to have finally made that dream a reality. I found this bike being thrown away during bulk trash week in Johnstown and scooped it up. It’s a 1985 Trek 450.

I cut out and welded in a new break bridge, and built a dimpler for the chain stay to give the rear tire the clearance it needed.

It took the effort of a lot of people to make this happen and I love that about it, lots of consultation from @racerracks and of corse huge shout out to @hopecyclery and @d.m.lane for helping me make my stubborn ideas a reality!

I am so ready for spring!

#johnstownpa
#hopecyclery
#centerformetalarts

For a long time I wanted to ride a road bike frame with bigger ti Read More

A lot of the research I do is to flush out ideas and techniques that I want to use in an educational context.

Recently I have been working on a one piece spatial forging to use as a power hammer project for a more in-depth look at how to safely and efficiently use flat dies and hand tools.

I have been doing more instruction on the hammers this year than I normally do and am really enjoying it. Looking forward to adding a variation of this to power hammer intensive workshops like our Forging Focus and other extended classes.

I’m happy with this prototype and will flip burgers with it this weekend to make sure it works properly. ?

#spatula
#kitchentools
#powerhammer
#centerformetalarts
#transitions
#johnstownpa
#cambriaironcompany

A lot of the research I do is to flush out ideas and techniques that I want to use in an educational context.

Recently I have been working on a one piece spatial forging to use as a power hammer project for a more in-depth look at how to safely and efficiently use flat dies and hand tools.

I have been doing more instruction on the hammers this year than I normally do and am really enjoying it. Looking forward to adding a variation of this to power hammer intensive workshops like our Forging Focus and other extended classes.

I’m happy with this prototype and will flip burgers with it this weekend to make sure it works properly. ?

#spatula
#kitchentools
#powerhammer
#centerformetalarts
#transitions
#johnstownpa
#cambriaironcompany

A lot of the research I do is to flush out ideas and techniques that I want to use in an educational context.

Recently I have been working on a one piece spatial forging to use as a power hammer project for a more in-depth look at how to safely and efficiently use flat dies and hand tools.

I have been doing more instruction on the hammers this year than I normally do and am really enjoying it. Looking forward to adding a variation of this to power hammer intensive workshops like our Forging Focus and other extended classes.

I’m happy with this prototype and will flip burgers with it this weekend to make sure it works properly. ?

#spatula
#kitchentools
#powerhammer
#centerformetalarts
#transitions
#johnstownpa
#cambriaironcompany

A lot of the research I do is to flush out ideas and techniques that I want to use in an educational context.

Recently I have been working on a one piece spatial forging to use as a power hammer project for a more in-depth look at how to safely and efficiently use flat dies and hand tools.

I have been doing more instruction on the hammers this year than I normally do and am really enjoying it. Looking forward to adding a variation of this to power hammer intensive workshops like our Forging Focus and other extended classes.

I’m happy with this prototype and will flip burgers with it this weekend to make sure it works properly. ?

#spatula
#kitchentools
#powerhammer
#centerformetalarts
#transitions
#johnstownpa
#cambriaironcompany

A lot of the research I do is to flush out ideas and techniques t Read More

I am so excited to finally be running workshops that take advantage of our solid fuel setup.

@john_williams_of_guildwerks giving a very thorough fire management demonstration and lecture!

#centerformetalarts
#johnstownpa
#cambriaironcompany
#toolmakingwithjohnwilliams

I am so excited to finally be running workshops that take advanta Read More

A 2.5lb crosspeen I recently finished for a custom order. I have played with this style for a long time but feel like I finally got what I was looking for this time. Here is to many more hammers this style. ?

#centerformetalarts
#toolmaking
#johnstownpa
#cambriaironcompany

A 2.5lb crosspeen I recently finished for a custom order. I have played with this style for a long time but feel like I finally got what I was looking for this time. Here is to many more hammers this style. ?

#centerformetalarts
#toolmaking
#johnstownpa
#cambriaironcompany

A 2.5lb crosspeen I recently finished for a custom order. I have played with this style for a long time but feel like I finally got what I was looking for this time. Here is to many more hammers this style. ?

#centerformetalarts
#toolmaking
#johnstownpa
#cambriaironcompany

A 2.5lb crosspeen I recently finished for a custom order. I have played with this style for a long time but feel like I finally got what I was looking for this time. Here is to many more hammers this style. ?

#centerformetalarts
#toolmaking
#johnstownpa
#cambriaironcompany

A 2.5lb crosspeen I recently finished for a custom order. I have Read More

Been a while since I posted a hammer....but there was something about this one!

#centerformetalarts
#forginghammer
#cambriaironcompany
@federknives

Been a while since I posted a hammer....but there was something about this one!

#centerformetalarts
#forginghammer
#cambriaironcompany
@federknives

Been a while since I posted a hammer....but there was something about this one!

#centerformetalarts
#forginghammer
#cambriaironcompany
@federknives

Been a while since I posted a hammer....but there was something a Read More

I’m very excited to announce that my “Historic V-bit Tong Mak Read More

Recently finished sculpture.
Untitled, 2021
Steel, Brass
18” x 6” x 8”

I experimented with several new ideas during the creation of this piece and am pleased with the results. I love the learning experience that each sculpture offers me and look forward to taking some of these elements and running with them.

#centerformetalarts
#cambriaironcompany
#forgedsculpture
#contemporaryblacksmith

Recently finished sculpture.
Untitled, 2021
Steel, Brass
18” x 6” x 8”

I experimented with several new ideas during the creation of this piece and am pleased with the results. I love the learning experience that each sculpture offers me and look forward to taking some of these elements and running with them.

#centerformetalarts
#cambriaironcompany
#forgedsculpture
#contemporaryblacksmith

Recently finished sculpture. Untitled, 2021 Steel, Brass 18” Read More

Cheers from the CMA Winter Residency.
#cmawinterresidency
#johnstownpa
#centerformetalarts
@racerracks
@larrainmaker
@stowell.logan
@nathanael_weiss

Cheers from the CMA Winter Residency. #cmawinterresidency #john Read More

×